Einleitung
You will remove screws from the bottom and sides of the camera in order to remove the cameras back cover.
Werkzeuge
-
-
To remove batteries, simply allow them to fall out of the camera.
-
Use a fingernail to lift the clock battery out of the camera.
-
-
-
Remove the screw located under the rubber flap on the left side of the camera using a Phillips #00 screwdriver.
-
-
-
Remove the two screws located on the other side of the camera using a Phillips #00 screwdriver.
-
-
-
Remove the three screws located at the bottom of the camera using a Phillips #00 screwdriver.
-
-
-
Open the battery cover.
-
Using the iFixit opening tool, push up gently around all edges of the camera.
-
To reassemble your device, follow these instructions in reverse order.
Ein Kommentar
i just wanted to by flap to replace over batteries it slides on and off reedalice270@gm.com
Can the hatch be replaced. The piece that holds the hatch is broken.
alisonbforman46 -
I had this issue for some time and never realized that lithium battery was so easily accessible. Fixed my problem.
Spud Head -