Canon PowerShot A620 Camera Housing Replacement

Geschrieben von: Jaime Abraham
  • Kommentare: 1
Canon PowerShot A620 Camera Housing Replacement

Schwierigkeitsgrad

Moderate

Schritte

11

Zeitaufwand

15 - 30 Minuten

Einleitung

  1. MejAZOhVhLfUjXCW
    MejAZOhVhLfUjXCW
    K4H3HZEMcB2xg4an
    g6piBckC1BtIKvSE

    • Slide the tab on the battery door while pushing the battery door away from you. The battery door should pop open.

  2. OFCcqLXOgeb2WHAw
    OFCcqLXOgeb2WHAw
    Pj3DcJonUwJW6YBo

    • Insert AA batteries according to the diagram printed on the camera.

    • Close the battery door.

  3. oPYCcPBTqPEE56uu
    oPYCcPBTqPEE56uu
    X3ThNKmcFHBcMuyV
    vA5tQmm2vRCPFBj1

    • Unscrew the three Phillips #00 1.6x3mm screws on the side.

    • Lift loose panel from the case.

    • Unscrew the two Phillips #00 1.6x3mm screws that were previously hidden beneath the panel.

  4. jPK2mU3gYUjlG4i3

    • Unscrew the two Phillips #00 1.6x3mm screws on the bottom panel.

  5. rdBJmlRvrcLecuck

    • Open the battery door.

    • Unscrew the four Phillips #00 1.6x3mm screws in the battery compartment.

  6. phGTJ5TomCESPKeF
    phGTJ5TomCESPKeF
    XCgeRWiOEwQEpWBT

    • Lift the terminal cover on the side of the camera.

    • Unscrew the three Phillips #00 1.6x3mm screws beneath the terminal cover.

  7. OhKbkRMMIrCFI3CR

    • Gently pull the top panel to separate it from the case.

    • Although the top panel will now be free from the rest of the case, it will still be attached to the camera by a ribbon cable.

  8. noZYFIwFgLFKm3l6
    noZYFIwFgLFKm3l6
    iVJAd2QGqQXtPmpP

    • Gently pull the front panel to separate it from the camera.

    • The battery terminals are easy to access from this step.

  9. iJwDisaWAqGsYw3l
    iJwDisaWAqGsYw3l
    MjjOOI1tPOiVp6bR

    • Gently pull the terminal cover to separate it from the camera.

  10. WNVFugRwMTUaiY15
    WNVFugRwMTUaiY15
    5DBxTSVTmYLNXhD2

    • Slide the memory card cover down.

    • Unscrew the Phillips #00 1.6x3mm screw beneath the memory card cover.

  11. qej4FX3WZTAfxvYh
    qej4FX3WZTAfxvYh
    iEW2SJUe2CEMpJoZ

    • Gently pull the back panel to separate it from the camera.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jaime Abraham

Mitglied seit: 08/09/14

350 Reputation

Ein Kommentar

Ottima spiegazione: é tutto facile quando la spiegazione é semplice ed univoca. Ma redigere istruzioni semplici é un'arte che non tutti possiedono.

Paolo Ravera -