Canon PowerShot A620 Shutter Button Replacement

Geschrieben von: Jaime Abraham
  • Kommentare: 0
Canon PowerShot A620 Shutter Button Replacement

Schwierigkeitsgrad

Moderate

Schritte

13

Zeitaufwand

15 - 30 Minuten

Einleitung

  1. oPYCcPBTqPEE56uu
    oPYCcPBTqPEE56uu
    X3ThNKmcFHBcMuyV
    vA5tQmm2vRCPFBj1

    • Unscrew the three Phillips #00 1.6x3mm screws on the side.

    • Lift loose panel from the case.

    • Unscrew the two Phillips #00 1.6x3mm screws that were previously hidden beneath the panel.

  2. jPK2mU3gYUjlG4i3

    • Unscrew the two Phillips #00 1.6x3mm screws on the bottom panel.

  3. rdBJmlRvrcLecuck

    • Open the battery door.

    • Unscrew the four Phillips #00 1.6x3mm screws in the battery compartment.

  4. phGTJ5TomCESPKeF
    phGTJ5TomCESPKeF
    XCgeRWiOEwQEpWBT

    • Lift the terminal cover on the side of the camera.

    • Unscrew the three Phillips #00 1.6x3mm screws beneath the terminal cover.

  5. OhKbkRMMIrCFI3CR

    • Gently pull the top panel to separate it from the case.

    • Although the top panel will now be free from the rest of the case, it will still be attached to the camera by a ribbon cable.

  6. noZYFIwFgLFKm3l6
    noZYFIwFgLFKm3l6
    iVJAd2QGqQXtPmpP

    • Gently pull the front panel to separate it from the camera.

    • The battery terminals are easy to access from this step.

  7. iJwDisaWAqGsYw3l
    iJwDisaWAqGsYw3l
    MjjOOI1tPOiVp6bR

    • Gently pull the terminal cover to separate it from the camera.

  8. WNVFugRwMTUaiY15
    WNVFugRwMTUaiY15
    5DBxTSVTmYLNXhD2

    • Slide the memory card cover down.

    • Unscrew the Phillips #00 1.6x3mm screw beneath the memory card cover.

  9. qej4FX3WZTAfxvYh
    qej4FX3WZTAfxvYh
    iEW2SJUe2CEMpJoZ

    • Gently pull the back panel to separate it from the camera.

  10. FeEDGU5N3OgLc3Wo
    FeEDGU5N3OgLc3Wo
    JnHFmxGfYte3adcC

    • Unscrew the Phillips #00 1.6x3mm screw located on the top panel.

  11. dkEA61FXJIIpmu1G

    • Gently lift the metal plate and move it to the side.

  12. g6WFmEr2YPK6LpgG
    g6WFmEr2YPK6LpgG
    uKBGEMvUqBgy1hpS

    • Unscrew the two Phillips #00 1.6x3mm screws that hold in the trigger button.

  13. T2VhbFAj4QwNsoon

    • The trigger button will fall off once the screws have been removed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jaime Abraham

Mitglied seit: 08/09/14

350 Reputation

0 Kommentare