Canon PowerShot S410 Battery Replacement

Geschrieben von: Randy Lormand
  • Kommentare: 1
Canon PowerShot S410 Battery Replacement

Schwierigkeitsgrad

Very easy

Schritte

3

Zeitaufwand

1 - 2 Minuten

Einleitung

This guide demonstrates how to remove and replace the battery pack.

  1. jIMwnyWSI3SXoSbo
    jIMwnyWSI3SXoSbo
    4SOZrVvgxu5N2MSw

    • Turn the camera with the bottom side facing up.

    • Locate the panel labeled "Batt. Open"

    • Place your finger on the panel and slide it in the direction of the arrow.

    • The slot will swing open revealing the battery pack.

  2. 6YAXDjDmausnZyqf

    • Rotate the camera so that the slot is horizontal.

    • Pull the orange lever and the battery will spring out slightly.

  3. AyWNI1HnCVhIpWyd

    • Grasp battery and fully pull out of slot

    • When placing the new battery back in the slot, the arrow on the battery must align with the arrow on the camera.

Abschluss

After a new battery has been inserted, close the swinging door and you're done.

Tinte & Feder

Randy Lormand

Mitglied seit: 24/01/11

349 Reputation

Ein Kommentar

One piece battery

Aasim Ansari -