Canon PowerShot SD1000 Back Panel Replacement

Geschrieben von: Phillip Phung
  • Kommentare: 0
Canon PowerShot SD1000 Back Panel Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

5 Minuten

Einleitung

The first step to replacing any camera parts is to remove the back panel. This only involves removing several small screws.

  1. EajwHR3EUkpKLroe
    EajwHR3EUkpKLroe
    pPDXLlAYZ1OSliPA

    • Remove the two 2.9 mm screws from the side panel closest to the camera lens.

  2. whM6P5nIAPTxoZJ2

    • Remove the two 2.9 mm screws from the camera bottom panel.

  3. a6PBfWvuc1gs62yk

    • Remove the two 2.9 mm screws from the side panel farthest from the lens.

  4. m1JgNdHMiOpqdLyY

    • Pull the back panel away from the camera body, starting at the end with the function buttons.

  5. EOx6jSEoGNcSRLVx

    • Remove the small cover panel and the attached wrist strap mount.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Phillip Phung

Mitglied seit: 20/01/12

558 Reputation

0 Kommentare