Canon PowerShot SX520 HS Back Face Replacement

Geschrieben von: Kyle Crowley
  • Kommentare: 0
Canon PowerShot SX520 HS Back Face Replacement

Schwierigkeitsgrad

Easy

Schritte

6

Zeitaufwand

8 - 10 Minuten

Einleitung

Did you drop your camera and crack the cover? This guide will give you step-by-step instructions on how to remove and replace the back face.

  1. PYX4NmEZxhdNMp3n

    • Using your fingers, slide the battery compartment door to the right until it unlocks.

  2. daqtFOHvPm6eNVZM

    • Rotate the door along hinges to open.

    • Take out the battery with your fingers.

  3. vpXvNRglEUvBawKL
    vpXvNRglEUvBawKL
    IBQLRBr2y4gdtAQT
    Pdt4HLvhl64GYE1I

    • Remove 2-3.4 mm screws that secure the back panel using a Phillips #000 screwdriver.

    • Remove 4-4 mm screws on the left and right sides of the camera using a Phillips #000 screwdriver.

  4. NwhElEg2RLgBE4Bs

    • Remove 2-4 mm screws that secure the bottom of the camera using a Phillips #000 screwdriver.

  5. LWHdiHptBoFUWD5Z
    LWHdiHptBoFUWD5Z
    BNGItp2ndspZ6sTJ

    • Pull back the rubber facing to access the A/V and HDMI output compartment.

    • Remove 1-3.4mm screw inside the compartment using a Phillips #000 screwdriver.

  6. IC26h5uEJMao1LEo

    • Once all screws are removed, pull the back facing off with your fingers.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Kyle Crowley

Mitglied seit: 23/09/15

337 Reputation

0 Kommentare