Canon Powershot A70 Rear Exterior Panel Replacement

Geschrieben von: Shalan Ertis
  • Kommentare: 0
Canon Powershot A70 Rear Exterior Panel Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

15 Minuten

Einleitung

This guide explains the location of exterior screws and the process to remove the rear panel of the Canon Powershot A70 camera.

  1. fc4htTXKDEcFPgcJ

    • Unscrew the three small screws on the bottom of the camera with a Phillips #00 screwdriver.

    • Remove the wrist strap.

  2. 3pognSvMACe3cnoA

    • Remove the screw in the CF compartment with a Phillips #00 screwdriver.

  3. 3SV3TdNPUUWtLoPH
    3SV3TdNPUUWtLoPH
    LoXGV2NHCXbPgGSa
    nYZkfSLCWuTtf2WP

    • Open the rubber Digital AV Out compartment flap.

    • Pry the battery with an opening tool.

    • Carefully pull out the battery with two fingers.

    • Remove the two screws that are now visible with a Phillips #00 screwdriver.

  4. YLTvyOwxD1fN6qHH
    YLTvyOwxD1fN6qHH
    VRJb3bfpZGxDM1lS

    • Starting from the bottom, carefully pull the casing off.

    • The casing will now pivot at the top.

    • There are three catches that hold the back casing to the body.

    • You may have to pull with some force. The rear panel will make a snapping noise when it separates from the body.

  5. JclfWrTnrZiw23HO

    • The interior of the camera should look like this.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Shalan Ertis

Mitglied seit: 26/01/10

68 Reputation

0 Kommentare