Canon Powershot A70 Speaker Replacement

Geschrieben von: Laura Greek
  • Kommentare: 0
Canon Powershot A70 Speaker Replacement

Schwierigkeitsgrad

Moderate

Schritte

12

Zeitaufwand

20 Minuten

Einleitung

This guide will help Canon Powershot A70 owners replace the speakers inside their camera.

  1. 2tKlOnHVejLt1Ioa

    • Open the battery compartment and remove the batteries.

    • Remove the two screws that are deep in the battery compartment with a Phillips #00 screwdriver.

  2. MBalOJAtBDYYfkk3
    MBalOJAtBDYYfkk3
    keFfQeKgoeUIvaM6

    • Open the CF compartment and remove the top screw with a Phillips #00 screwdriver.

    • The panel that holds the shutter button and zoom will come off.

    • Be careful! There are two small wires connecting the speaker to the body of the camera. These are very delicate so proceed with caution. Do not remove.

  3. fc4htTXKDEcFPgcJ

    • Unscrew the three small screws on the bottom of the camera with a Phillips #00 screwdriver.

    • Remove the wrist strap.

  4. 3pognSvMACe3cnoA

    • Remove the screw in the CF compartment with a Phillips #00 screwdriver.

  5. 3SV3TdNPUUWtLoPH
    3SV3TdNPUUWtLoPH
    LoXGV2NHCXbPgGSa
    nYZkfSLCWuTtf2WP

    • Open the rubber Digital AV Out compartment flap.

    • Pry the battery with an opening tool.

    • Carefully pull out the battery with two fingers.

    • Remove the two screws that are now visible with a Phillips #00 screwdriver.

  6. YLTvyOwxD1fN6qHH
    YLTvyOwxD1fN6qHH
    VRJb3bfpZGxDM1lS

    • Starting from the bottom, carefully pull the casing off.

    • The casing will now pivot at the top.

    • There are three catches that hold the back casing to the body.

    • You may have to pull with some force. The rear panel will make a snapping noise when it separates from the body.

  7. JclfWrTnrZiw23HO

    • The interior of the camera should look like this.

  8. 4dhsfvlVfjjNlxYi

    • Remove the two screws at the top of the battery compartment with a Phillips #00 screwdriver.

  9. r6ZjAUN1oxMPGS6L
    r6ZjAUN1oxMPGS6L
    EoEGu4soyh5AT1lE

    • With your right thumb, pull back on the tab while using your left hand to pull the face of the camera away from the body.

  10. aEelAn13VKe4AxwQ

    • Remove the two clearly visible screws from the control dial with a Phillips #00 screwdriver.

    • Remove the dial—it should come off easily.

  11. fIEhwZmDpQix6LBf
    fIEhwZmDpQix6LBf
    bHJMUxatCLQoZaH3

    • With tweezers, carefully unplug the two small wires from the green plug.

    • Carefully replace the broken speaker/shutter panel with a new one.

  12. DR3TItUmmdRxRmvo

    • The removed panel should look like this.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Laura Greek

Mitglied seit: 25/01/10

28 Reputation

0 Kommentare