Canon Powershot SD880 Front Cover Replacement

Geschrieben von: Robert Manno
  • Kommentare: 0
Canon Powershot SD880 Front Cover Replacement

Schwierigkeitsgrad

Moderate

Schritte

2

Zeitaufwand

Keine Schätzung

Einleitung

  1. EqRbcTqNCb1PNIKd
    EqRbcTqNCb1PNIKd
    3yUfHYhnFwkJxjw2
    FqEvIqWFLhwxTUHO

    • Remove the two 2.4 mm screws on the side of the camera that are next to the LCD screen using a Phillips #00 screwdriver.

    • Remove the two 4.1 mm screws on the other side using a Phillips #00 screwdriver.

    • One screw will be located under the rubber USB flap.

    • Remove the single 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.

    • Slowly pull the back cover off of the camera.

  2. V4OjRJwYYOwwfuFI
    V4OjRJwYYOwwfuFI
    whkBXL5kYbQYZRPV
    IvVJLMoJWmatumLV

    • Remove the 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.

    • Remove the 4.1 mm screw from the menu button side of the camera using a Phillips #00 screwdriver.

    • The two screws on the other side of the camera were already removed when the back cover was taken off.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Robert Manno

Mitglied seit: 06/01/11

432 Reputation

0 Kommentare