Canon Powershot SX500 IS Battery Replacement

Geschrieben von: Jody Wilkerson
  • Kommentare: 2
Canon Powershot SX500 IS Battery Replacement

Schwierigkeitsgrad

Very easy

Schritte

3

Zeitaufwand

1 Minute

Einleitung

The user will need a replacement battery or fully charged battery to insert into the camera. No tools required.

  1. CaXkHRxwCREXIHho

    • Rotate the camera to expose the underside of the camera.

  2. VESqKcnMguAbpt2M

    • Slide the rounded rectangle tab to the left to release the battery cover.

  3. RtYQeYyyRN6HNMSK

    • Push the small orange tab forward to release the battery (Battery is ready for removal).

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jody Wilkerson

Mitglied seit: 07/04/15

547 Reputation

2 Kommentare

Simple & to the point. One would think manufacturers would hop on-board recruiting others like yourself.

Will check your site for other "ifixits". (Completely unsolicited).

Jim

Jim Brennan -

Hi guys, I have a Canon SX500 IS and I jumped inside the swimming pool with its original battery by mistake so it was wet and decided to buy another battery after 4 years and put back on but it's still not switching on

I need some advice guys please what should I do?

Lwazi -