Canon ZR70MC Side Panel Replacement

Geschrieben von: khalid clarke
  • Kommentare: 1
Canon ZR70MC Side Panel Replacement

Schwierigkeitsgrad

Moderate

Schritte

12

Zeitaufwand

15 Minuten

Einleitung

The panels of the Canon ZR70MC hold the camcorder together. The side panel in particular protects the main circuit board of the camcorder and also protects the imaging films located inside. This guide will show you how to take off the side panel, allowing easier access to the LED screen and lens component of the Canon ZR70MC. You should also have a designated location for the small parts of the camcorder so that you do not lose any pieces. Also, do not damage any wires that you come across.

  1. sTAia1WEa44IWlAA
    sTAia1WEa44IWlAA
    vVyyIxAlFilWMXXi

    • Unscrew the 3.35mm screw.

  2. OhfWZyMxAwqPlHKB

    • Turn the ZR70MC so that you can see the bottom of the camcorder.

    • Unscrew the 3.35 mm located in the top left portion of the camera.

  3. mHF6TBNEIBcOsaef
    mHF6TBNEIBcOsaef
    3fgJtAwP1CnVUsHY
    6AoYd2PUy2RjTL3v

    • Turn the camera on the side and remove the cover for the audio inputs. There is a 2.65 mm screw located behind the cover.

    • Remove the 2.65 mm screw.

  4. 6qDHSlgFqZwXKfdB
    6qDHSlgFqZwXKfdB
    DBMSYmydxJLX3LKn
    IMVCsI4KwbwCBY4E

    • Remove the cover located on the front of the camcorder and remove the cover by pulling on the bottom groove.

    • Locate and remove the two 3.35 mm screws.

  5. kLcItAhZ22b5wk52
    kLcItAhZ22b5wk52
    BmIchv5FURWDnLmq

    • Turn the camcorder so that the bottom is facing up and open the tape cassette compartment.

    • There is one 3.35 mm screw located under the tape cassette panel on the front left side of the camcorder. Remove the screw.

  6. dAwU2ShVyNHrgsAb
    dAwU2ShVyNHrgsAb
    ywAsIimMnYiIlZZk
    KV5oUKovE2E34kwg

    • Now that all of the screws are removed, remove the front panel by gently pulling on the front panel.

    • The speaker will be connected to the main body by a wire. Be careful not to damage this wire.

  7. LdqvNkWUVdYJaEKh
    LdqvNkWUVdYJaEKh
    nRHZO24ol5lURL4T
    OUMFulvID6ofqAHv

    • Use tweezers to gently pull the speaker wire from the main body of the camcorder.

    • Pull the front panel completely away from the main body of the camcorder.

  8. 2T3P23LnSfosfxRK

    • Remove all 3.75 mm screws from the bottom of the camcorder.

  9. VWuV2fdLgrUvLcFG
    VWuV2fdLgrUvLcFG
    una1ZkyL2xNZCVuj

    • Turn the camcorder so that the back is facing you.

    • Remove the 3.75 mm screws from the back of the camcorder that hold the side panel in place.

  10. CpNs5fEivP2R2xK5
    CpNs5fEivP2R2xK5
    QeM3KQx5fqKwqB4b

    • Now that all of the screws are removed, gently pull off the side panel of the camcorder.

  11. wWdToUHo3ICHvD1M
    wWdToUHo3ICHvD1M
    blYAiENWKXAmDkRF

    • Gently pull the two black wires from their connections. These black wires are the only thing left connecting the side panel to the main body of the camcorder.

  12. bVGtJDcCNJ163ftr

    • Gently pull the orange films out of their connections. This will allow you access to all components of the main body.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

khalid clarke

Mitglied seit: 26/09/17

728 Reputation

Ein Kommentar

How to fix the start/stop button when it doesn't responding.

Cedee Nunnil Gampal -