Capresso Perfectea 260 Motherboard Replacement

Geschrieben von: Rohin Chander
  • Kommentare: 0
Capresso Perfectea 260 Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

15 - 20 Minuten

Einleitung

This guide will teach you how to replace the motherboard within the Capresso Perfectea.

  1. PKHiHYWCuZXPWHvv

    • First, take the base of the device and flip it over.

  2. 6WfGwBDnw5WG1mjI
    6WfGwBDnw5WG1mjI
    ejWvIyXDUHICcrPS

    • Remove the four 12 mm Phillips #2 screws surrounding the base then lift the bottom half of the base to expose the circuit boards inside the device.

  3. qZtfgrZpyONeCJDA

    • Remove the two 7.5 mm Phillips #2 screws holding in the motherboard

  4. WmhNDW1JElrGRm3c

    • Unplug the wire going into the side of the motherboard

  5. 1RkiXHwF4B2mjXwV
    1RkiXHwF4B2mjXwV
    XgSUc4IAMOZ2Coyv

    • Use the metal spudger to cut open the rubber covering the latch where it clamps onto the copper tab.

    • Unplug wire at heating element by first using the metal spudger to push the latch in and then pushing it out.

    • Be careful when unplugging the wire as if it is done too forcefully it can damage the connection and make it difficult to connect a new motherboard

  6. s6geYQX5PMbNIDYp

    • Lift the motherboard out of the device

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Rohin Chander

Mitglied seit: 14/04/15

101 Reputation

0 Kommentare