Casio Exilim EX Z55 Motherboard Replacement

Remove eight 1.8 mm screws from the left and right sides of the camera using a Phillips #00 screwdriver

Remove the four 3.7 mm screws from the bottom of the camera using a Phillips #00 screwdriver.

Separate the front case from the body of the camera.

Separate the back case from the body of the camera.

Remove the metal grating located to the right of the LCD screen by inserting the plastic opening tool under the grating and pulling up.

Before removing the side metal bracket, first remove the attached strap knob by twisting it off.

Then, remove the side metal bracket by inserting the plastic opening tool under the bracket and pulling up.

Using the plastic opening tool, pry up the LCD screen starting at one of the corners. Insert the tool under one of the corners and lift up.

Continue to lift the LCD screen all the way up.

Remove the orange ribbon cable by grabbing the white tab with your fingers and pulling gently.

Remove the two 1.7 mm screws from the motherboard using a Phillips #00 screwdriver.

Using the iFixit plastic opening tool, pry the battery case clamps on the front of the camera so that the bottom will come loose.

Detach the inner orange ribbon cable that connects the motherboard to the lens by inserting the iFixit plastic opening tool under the tab and lifting up.

Separate and remove the motherboard from the lens.