Chefmate TO-09 Timer Replacement

Geschrieben von: Andy Tran
  • Kommentare: 0
Chefmate TO-09 Timer Replacement

Schwierigkeitsgrad

Easy

Schritte

7

Zeitaufwand

10 - 15 Minuten

Einleitung

If the timer on your Chefmate Toaster Oven (model TO-09) has stopped functioning, use this guide to learn how its function can be replaced or restored.

The timer on the toaster oven sets the duration of time for which the appliance will be actively heating. A defective timer switch will not turn off the oven at the end of the time selected, or it may cease the function of the appliance completely by not being able to start the oven in the first place.

Before using this guide, inspect the exterior of the timer to make sure nothing is obstructing its mobility. The timer function should typically still work regardless of whether it is plugged into power or not. If after inspection it still is not working, we can conclude that the timer is dysfunctional.

Steps 2 and 3 require the use of the Phillips #0 Screwdriver, or a “plus” screwdriver that has a head with pointed edges in the shape of a cross or plus sign. In addition, a flat screwdriver is needed to complete step 5, and flat pliers may also be needed to complete the step.

Before beginning, make sure the appliance is completely unplugged from power.

  1. 1EtisYRCpCxvPbfF
    1EtisYRCpCxvPbfF
    lXwqU2Nmi3yNVopX
    id41oqHgv4ACqKKQ

    • Examine the condition of the appliance.

    • Remove the tray from inside the toaster oven before dissembling.

    • With the tray removed, this is a great opportunity to clean your toaster oven . Built up debris left over time could lead to functional issues in the future!

  2. keyLnIPa6s4gSPWf
    keyLnIPa6s4gSPWf
    HDF5JKYERNcamUMG
    aoSUO41XZkDrEBcY

    • Flip the toaster oven on its head so that its bottom side is facing upwards.

    • Use a Phillips #0 screwdriver to remove the four screws hidden underneath the legs of the appliance.

    • There are two legs covering the two screws in the front peg .

    • The other two screws are visible under the back legs.

  3. XWXCpvdudOGfjLPX
    XWXCpvdudOGfjLPX
    VIllbwTpVV5XEESE
    clAPPRxJv4EVHpVb

    • Return the toaster oven to its upright position and rotate it so its backside is facing you.

    • Use the Phillips #0 screwdriver to unscrew the four screws visible on the backside.

    • Keep track of loose screws for later re-assembly.

  4. SAAXGtiWJxQ6ls53
    SAAXGtiWJxQ6ls53
    iRKWWdVHu5ogTEGf
    kdpjOGW46jLoZhgx

    • With the appliance facing you, remove the top cover of the toaster oven to access the timer location.

  5. TX6BgH1O1sQOcwGC
    TX6BgH1O1sQOcwGC
    XTlrRZHCr4gNLHwT
    KVp1MiyshKYOepOB

    • Use the flat screwdriver as a wedge and pop the timer knob out of place.

    • If you have difficulty removing the timer by hand, use a flat plier to pry off the timer knob.

  6. IUcraAdkERZgEbZH
    IUcraAdkERZgEbZH
    be2IodpJk4dWPmJi
    YWtHAagaLIr4rpIk

    • With the timer in hand, gently remove the two wires attached to the square object.

    • Unplug the timer wire gently, or else this may cause damage to the cables.

  7. eWOadsJYDRPig562
    eWOadsJYDRPig562
    DLRHIHLXiK6qXQXp
    Mrot6Yuc1DXitokC

    • Before replacing your timer with a new one, you may try to lubricate it first to see if it fixes the issue.

    • Apply WD-40 to the timer's slight peek edge.

    • Let the WD-40 sit and take effect for around 30 seconds or a minute after you spray it onto the timer.

    • The WD-40's oil will seep inside the timer, reaching the tiny gear of the timer.

    • WD-40 is flammable. Be sure to read the instruction label before using WD-40 Two-Way Spray Can.

    • Not cleaning/wiping off excess WD-40 oil on the timer will start a fire in the toaster oven.

    • You can test the timer using a flat head screwdriver to turn the timer to see if it ticks/works.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Andy Tran

Mitglied seit: 05/04/22

172 Reputation

0 Kommentare