Cleaning the Fan Blades

Geschrieben von: Vivian Fong
  • Kommentare: 1
Cleaning the Fan Blades

Schwierigkeitsgrad

Very easy

Schritte

6

Zeitaufwand

5 Minuten

Einleitung

This guide will disassemble the fan to clean the fan blades.

  1. 6b6oh5hUCcQUSf6Z

    • Use the Phillips #2 screwdriver to remove the four 6 mm screws by unscrewing counterclockwise.

    Hi I had the same problem where the fan would turn on it just wouldn't rotate. So I read all these solutions and right before I started to take the fan apart,my husband toke it and sprayed some WD-40,along the base above the plug where it rotates. Spray all around. Wait about 3mins,plug it in, and BAM it works great…. Thank God for husband's,

    tiffany Gallardo -

  2. Y6vJmjOmxG61bPM5

    • Pull the front and back cover apart.

    • Be careful not to pull the front cover off completely. It holds the wires.

  3. XHWvyaWwUpep1wpM

    • Remove the Phillips 6 mm screw that holds the circuit board to the outer shell of the fan.

    • Shock warning: Make sure the fan is unplugged before removing the circuit board.

  4. sLTRIkGcZTmBxkVi

    • Remove the top cover containing the circuit board and the wires by pulling it away from the outer shell of the fan.

  5. UdtUj1sbSgcTgTEE
    UdtUj1sbSgcTgTEE
    eIAOH6xoNckJNyLh

    • Remove the screws from the four corners of the circuit board.

    • Remove the circuit board from the top cover.

    • Do not touch the other side of the circuit board to avoid damaging the circuit elements.

  6. yHGYb1FMgcPMtJ53

    • Follow steps 1-4 to remove the front, back, and top covers of the fan to reach the fan blades.

    • Use a cloth to clean off dust clogged in between the fan blades.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Vivian Fong

Mitglied seit: 26/09/12

97 Reputation

0 Kommentare