Clipper Lighter Flint Replacement

Geschrieben von: Daniel Gherman
  • Kommentare: 6
Clipper Lighter Flint Replacement

Schwierigkeitsgrad

Very easy

Schritte

7

Zeitaufwand

5 - 10 Minuten

Einleitung

Today a lighter is used more than ever and having the means to replace a part on it can go a long way, especially for your pockets. Clipper lighters have the ability to replace the flint so why not take advantage of this and replace the flint instead of buying a new one each time. Plus it's way more eco-friendly!

This replacement should take no time at all and is something absolutely anyone can do; just be sure to have bought your replacement flint.

Ersatzteile

  1. Te3ngbTLWGdQTisi
    Te3ngbTLWGdQTisi
    ncAIJO5FpVJ24jCs
    v3T6kuKMIAMYviK6

    • Purchase flint for lighters - should look cylindrical in nature and small.

  2. UifQgwmrNAhnNdxe
    UifQgwmrNAhnNdxe
    HqKJHDyhtdAqLHZ6

    • Pull upwards on the spark wheel to remove it from the lighter.

  3. xwJZvnYtFxv5FTOb

    • Flip the mechanism upside down so that the groove is facing up.

  4. pjAXiRwUWjDDQbKZ
    pjAXiRwUWjDDQbKZ
    blMwhXncuLg2qmeB

    • Use the top of the lighter housing to twist the cap loose.

    • Set aside the lighter once it becomes loose enough to do it by hand.

  5. j1vFbxwHpyXfP2Cy
    j1vFbxwHpyXfP2Cy
    AnjipUubX6BkOCjb

    • Pull on the cap and the spring will come out with it.

  6. JtKlhoHUa6WSYcNe
    JtKlhoHUa6WSYcNe
    iaRoBhIPKgjgZSbI

    • Flip the mechanism and tap on the bottom so that the old flint falls out if there is any left.

    • Use a hard surface if necessary.

  7. oWeXmdWhFEUJ1jKP

    • Take a new flint and drop it down the tube.

    Thanks a lot for this repair tutorial !!

    david dmalovski -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Daniel Gherman

Mitglied seit: 18/01/22

313 Reputation

5 Kommentare

thank you very much for the clear instruction, it was very helpful.

Daniel Kalani -

SO Thankful 4this! Wish much more could stay out of landfills!! We're such a wasteful country!!

deborah Smith -

Easier than I thought...cool dude

Teresa Sigerson -

Thanks working again

Anthony Martin -

I've got the metal Clipper with a cap over the wheel (EU version). Instead of flicking the wheel with your thumb, you press down on the cap/switch. Now my flint's exhausted and I can't figure out how to remove the cap to change it! Does anyone know?

cherrya.facebook -