Cobra SPX 5300 Buttonboard Disassembly

Geschrieben von: Megan McDonough
  • Kommentare: 0
Cobra SPX 5300 Buttonboard Disassembly

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

Keine Schätzung

Einleitung

This guide will walk you through removing the buttonboard. Removing the buttonboard will give you access to the buttons and the display screen.

  1. XlwqXpZDjPunEatF
    XlwqXpZDjPunEatF
    eQDPk3gdqt2YITML

    • Remove the four 9.5 mm Phillips #0 screws from the back of the device.

  2. YVQZIquXSLEtGFAM
    YVQZIquXSLEtGFAM
    eJnDfLTqM3fTo1xE

    • Pull the black plastic back case off of the device.

  3. eDnd1jveGsFaLqJ1

    • Lift up the motherboard and lay it flat next to the device.

    • Be careful not to sever the wires. The buttonboard is connected to the motherboard by the wires.

  4. DAL6qIMhXESf2eBb

    • Remove the windshield bracket mount.

  5. TFNYoVwPVpPE1fRy

    • Remove the four 4.8 mm Phillips #00 screws from the buttonboard.

  6. V16ehJHEEjV15mhk

    • Lift buttonboard to expose silver button plate.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Megan McDonough

Mitglied seit: 25/09/15

110 Reputation

0 Kommentare