Coby DVD-R11000 3-Pin Power Cable Replacement

Geschrieben von: Andrew
  • Kommentare: 0
Coby DVD-R11000 3-Pin Power Cable Replacement

Schwierigkeitsgrad

Very easy

Schritte

3

Zeitaufwand

5 - 10 Minuten

Einleitung

  1. tpqDmECNUQuThEv2
    tpqDmECNUQuThEv2
    MCtTLh3SsQKYJ4Gn
    oMqPXWJrNIcyQRuI

    • Remove the four 1cm screws, two on each side, of the DVD player with the Phillips #1 screwdriver.

    • Remove the five 1cm screws on the back of the DVD player with the Phillips #1 screwdriver.

    • It is not required to remove the other seven screws in the middle between the I/O ports.

  2. Z1XQBs4yrLYKQ1PJ
    Z1XQBs4yrLYKQ1PJ
    rSsKmMPQfidyqHP6
    4WqbWMJaTlIA52TF

    • Position the DVD player so that the back is facing you

    • Grab underneath the sides of the DVD player and lift the front of it upwards.

    • Carefully pull the top of the casing off

  3. g5MhhnEwlKuJHfIp
    g5MhhnEwlKuJHfIp
    1MZjKjwgoeXv13EH

    • Gently pinch the 3-pin white adapter of the wire connecting the power cord to the circuit board.

    • Remove the wire from the circuit board.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Andrew

Mitglied seit: 22/10/14

501 Reputation

0 Kommentare