ComNet Ericsson Panther 600P Display Replacement

Geschrieben von: Daniel
  • Kommentare: 0
ComNet Ericsson Panther 600P Display Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

10 - 15 Minuten

Einleitung

With a few tools, a little bit of time, and a moderate degree of commitment, you can replace a damaged display on ComNet Ericsson Panther 600P.

  1. hukvoDmosZklhTUx
    hukvoDmosZklhTUx
    Bubb2BUkNqvD2kjC
    fT4IN2SMwwZSdwEI

    • Look for the release button on the back of the radio.

    • Press the button and pull down on the battery at the same time. The battery will come free.

  2. uKPVIP6mGuVIKWAv

    • Twist the antenna counter-clockwise to unscrew it from the antenna jack.

  3. 3xcZAA1pIWGBurUu

    • Pull up on the dials to remove them from the underlying pegs.

  4. 2BOKuBBCP4YqJoci
    2BOKuBBCP4YqJoci
    xwyCbQ5ZAET6ka2y
    AQ5anyrcAmObSuEj

    • Using a T15 Torx screwdriver, unscrew the two screws.

    • Using a plastic opening tool, pry the internal case from the external case.

  5. gqockEXp5rf6SZib
    gqockEXp5rf6SZib
    KrGmIH4EZxJKI4ZA
    PkE5MnIYFdPAWLCG

    • Using the plastic opening tool, pry the case apart.

  6. OOY3rMuFY2DnfP4x
    OOY3rMuFY2DnfP4x
    6trYw1PTViboKUfn

    • The keypad chip is attached to the motherboard by a ribbon.

    • Pull ribbon with tweezers to detach from back panel.

  7. fXKlqlI5YiXFKBlO
    fXKlqlI5YiXFKBlO
    VdFROpUCMSjTLHUF
    OEGglMBkKHCQY1rq

    • Screen will be attached by a ribbon.

    • Pull screen up and away from motherboard to detach.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Daniel

Mitglied seit: 14/01/15

109 Reputation

0 Kommentare