Einleitung

This guide requires the removal of the housing which takes some time and work. However, after this the removal and replacement of the power cord is really simple.

  1. Xco6Bokn1KWQaPbY
    • Remove the Philips #1 28 mm.

    • Make sure device is unplugged and cool before attempting to replace parts.

  2. WKbdPC4dnmySlvTr
    • Remove the Philips #1 22 mm screws.

  3. xkUBTSub6UhloNtK
    xkUBTSub6UhloNtK
    xQ3DGVSON22FxIc5
    3If1pjddPQPaYu5x
    • Pry off the housing using a plastic spudger.

  4. 5hMKh6SWXigSChxp
    • Pull power chord out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jonathon Bruer

Mitglied seit: 09/11/17

589 Reputation

3 Kommentare

Where do I find the cords needed for the repair I've looked everywhere

John Cornelison -

I also couldn’t find the needed cord.

C vd Linden -

I'm surprised that anyone won a prize for these instructions when they've left out the source of their replacement cord.

The replacement power cords are apparently mythical by this time, and I think that Global Beauty bit the dust as well. But if you disassemble the swivel (the part with the sliding electrical contacts) you may notice that the "male" portion of the swivel assembly looks like you could dig or drill out the broken wires and solder in the inner wires of the existing power cord, which will render the cord a bit shorter. You'll also need some sort of flexible strain relief, and I think that the old one could be cut off the discarded portion of the old power cord and glued (with cyanoacrylate, or Super Glue) back onto the cord.

Mark Kinsler -