Einleitung
To access any of the internal components of the Connect Four Electronic Handheld, you will need to remove the back casing.
Werkzeuge
-
-
Make sure the Connect Four Electronic Handheld is off by allowing it to shut off automatically.
-
-
-
Using a Phillips head screwdriver, remove the (9.1mm length) #2 screw in the middle of the battery casing.
-
Slide the cover off and remove the battery.
-
-
-
Using a Phillips head screwdriver, remove the four (7.1mm- length) #3 screws that hold the back casing in place.
-
Carefully remove the back casing.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
