Einleitung
Broken zoom trigger? No problem! If you own a Nikon Coolpix digital camera and are experiencing a jammed zoom trigger or a zoom trigger that just won't work, this guide will surely help.
-
-
Before starting, make sure the camera is powered off.
-
Take the Hex and PH000 bit to remove a 2mm screw from the left side of the camera.
-
Next, remove the 2mm screw from the right side.
-
Lastly, remove the 3mm screw from the bottom of the camera.
-
-
-
Once the two 2mm screws and the 3 mm screw have been removed, use the smallest plastic opening tool and pull up on the sides to reveal the inside of the camera.
-
-
-
After the battery is out, remove the gray button bar from the top of the camera with the smallest opening tool.
-
With the gray bar detached from the camera, turn it upside down. With the Hex and the J000 bit remove the two 1mm screws.
-
-
-
Take the needle nose tweezers to remove the black ring in the middle of the button.
-
You have successfully removed the zoom trigger and can replace with a new one if needed.
-
To reassemble follow steps in reverse.
-
To reassemble your device, follow these instructions in reverse order.
