Copic Marker Nib Replacement

Geschrieben von: Iris Lin
  • Kommentare: 0
Copic Marker Nib Replacement

Schwierigkeitsgrad

Easy

Schritte

6

Zeitaufwand

8 Minuten

Einleitung

Tired of buying new Copic Markers? Wish you could just simply replace the nib? Well, this is the guide for you!

After using a Copic Marker for a long period of time and the nib begins to curl and fray, it is time to replace it. The ink also should be refilled simultaneously at this point as it is running low. The only tools needed to complete this guide are some paper towels and a pair of tweezer!

  1. 5VGyHAkFolJZFojn

    • Place a few paper towels on the surface of your workspace to protect it from ink spills.

  2. ijvhqPRASeMAQBkH

    • Remove the cap from the marker to expose the nib.

  3. eHfquINHv2HeBbew
    eHfquINHv2HeBbew
    taDwhGWE63oFvSXg
    JAjQJ1UfyLiDUpUh

    • Gently tug out the thicker part of the nib with the tweezer.

  4. fefmKUZHUkLF6IeP
    fefmKUZHUkLF6IeP
    yWaH4mFR1tULbZSm

    • Remove the cap of the ink bottle and tilt the container to begin filling the marker.

    • Avoid forcibly squeezing the ink bottle.

    • Slowly fill the pen until it is approximately 3/4ths of the way full.

  5. BIQNqMICkocJMT1J
    BIQNqMICkocJMT1J
    lVoEAVnpaAqMOOEM
    fJcTDdDCgLPR4WBL

    • Insert the flat side of the new nib facing the opening of the marker until it snaps into place.

    • Set the marker down after replacing new nib.

  6. tdLctrpOkJfRMYJf
    tdLctrpOkJfRMYJf
    2UEeJwcwDBWyPN42
    daT2cmR2cGUx4EwM

    • Wait 3 minutes for the color to spread through the nib until it is no longer white.

    • Press on the middle of the marker 3 times to insure ink is spread throughout.

    • Repeat steps 3 - 5 if the amount of ink is insufficient.

Tinte & Feder

Iris Lin

Mitglied seit: 28/04/17

149 Reputation

0 Kommentare