Corsair Katar Disassembly

Geschrieben von: Ryan Matesa
  • Kommentare: 0
Corsair Katar Disassembly

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

5 - 10 Minuten

Einleitung

If you need to disassemble your Corsair Katar mouse, this guide will demonstrate how to take it apart.

  1. Gomf6h1ntJAswYs6
    Gomf6h1ntJAswYs6
    DH4TgqdDULXjmsFA

    • Unplug your mouse before starting.

    • Flip the mouse over so the bottom is facing up.

  2. sAPDavweVwYGGRWp

    • Remove the three skates on the bottom of the mouse using the plastic opening tools.

    • Skates will be very sticky.

  3. L2sCyOVNb6wQ2xMZ
    L2sCyOVNb6wQ2xMZ
    VZ3siD2owmXEs5oE

    • Use the JIS 0 screwdriver to remove the four 5 mm screws on the bottom of the mouse.

  4. OpMQYwOdujvupbiW

    • Detach the bottom of the mouse from the upper shell.

    • Remove the shell slowly so as not to damage the white DPI cable inside the mouse.

    • Use the plastic opening tool to detach the white DPI sensor cable from its port.

    • Alternatively, you can use your hand to remove the DPI sensor cable by wiggling it out of the port.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Ryan Matesa

Mitglied seit: 12/07/18

248 Reputation

0 Kommentare