Einleitung

If your Crock-Pot Express Crock Multi-Cooker does not seal properly, use this guide to replace your bobber valve.

  1. O6H2A3U3BlSNVTEd
    O6H2A3U3BlSNVTEd
    GAkF1JwD2RxZfsGT
    b5swR4CkpItqGQOm
    • Orient the crock pot where the lid locked and unlocked icons are visible.

    • Grasp the handle firmly and turn the lid clockwise until the arrow and the lid unlocked icon are facing each other.

    • Remove the lid.

    Bobber Valve Gasket
    SKU: SAP_196077000000

    link no longer works because 10qt piece discontinued. They are shipping me valve for 8qt lid to see if it works. I have attached part number for 8 qt bobber valve gasket.

    Thanks

    Bo Peep -

  2. J2PBpl1VmoZHFwsh
    • Flip the lid over and expose plastic washer.

  3. YpQmGFCNSUAB4QCf
    • Pull the plastic washer off the bobber valve and allow the bobber valve to fall out

    Replaced and valve keeps falling out. What do I do now?

    Tina Royce -

Abschluss

To reassemble your device, follow these instructions in reverse order.

William Kelly

Mitglied seit: 24/09/18

745 Reputation

7 Kommentare

Ok I followed your directions but the new valve just keeps calling out?

dpataky1952 -

First time I used this but the bobber valve ports steam and does not stop ( unit is brand new )

Archerkc -

would be nice to see the other side of this. is it just supposed to be a hole on the outside up top? it is letting out air…when im trying to pressure cook.

shaycooks2 -

Ditto I was wanting to know the same thing!

kate2272 -

Ditto. Mine does the same thing.. suggestions?

Tina Royce -

the bobber valve got stuck I am not able to open the lid, the cooker has cooled down

Sai Ganesh Hariharan -

what is the bobber value called that sits on top of the lid? the value is there and is fine but the part that sits on top of the lid is missing. thank you. I was told I have to buy the whole lid.

Diana -