Crosley CR42 Band Replacement

Geschrieben von: Roberto Rosila
  • Kommentare: 1
Crosley CR42 Band Replacement

Schwierigkeitsgrad

Easy

Schritte

7

Zeitaufwand

2 - 10 Minuten

Einleitung

This guide is going to show you an easy way to replace the turning band in you Crosley CR42. So you can enjoy your LP sooner rather than later.

  1. QRfvDp5GvXYrLUHC

    • Check troubleshooting wiki to make sure you aren't doing way more work than you have to!

    • If you believe the band may be broken or out of place, start by unplugging the record player.

  2. wHfvWP2XJDH3Yy1c
    wHfvWP2XJDH3Yy1c
    BtZhRFEAjO3EQURR

    • Make sure the needle is in its resting position off to the side.

    • Gently remove the turntable from the device by lifting it directly upward.

  3. Qs2tpDVYGiDFmUOM

    • Find the band, it may have fallen into the inside of the record player as you removed the turntable.

    • Inspect your band for any tears, rips, or obvious signs of stretching.

  4. cGJYfICNSOHpZNBR

    • Flip the turntable over.

    • Locate the notch on the back side of the turntable.

    • The notch will be on the outside edge of the turntable.

  5. 3n2L3HHmRYmk1YLg
    3n2L3HHmRYmk1YLg
    YLUhSSKGnVvnYFMa

    • Wrap the band around the inner circle of the turntable and gently pull the band until you get to the notch.

    • Loop the band around the notch, the band should be taut.

  6. 2K2mbXG525Yv2ULF
    2K2mbXG525Yv2ULF
    AWp3IpISsOiB4XPx

    • Place the turntable back onto the device.

    • Make sure to line up the band with the turning knob, to ensure the band is properly placed.

  7. cDieOg5dQR1GypuU

    • After the turntable is back on the device, gently turn it clockwise until you hear a 'click.'

    • Job well done!

Tinte & Feder

Roberto Rosila

Mitglied seit: 26/01/14

319 Reputation

Ein Kommentar

My CR42 has a plastic piece that will not let me simply pull the turntable off. I don't want to try to hard to break it, but I also don't know how to get it off to replace the band.

athena -