Einleitung
This guide will walk you through the process of replacing the rear wheel of your cruiser bike. You will need to replace your wheel if it is flat or continues going flat. This process can be tricky, considering the parts associated with the rear wheel. Make sure you have the correct tools for the job and follow the directions strictly.
-
-
Slip the chain onto the crank and rear cog. Then insert wheel into rear drop-outs.
-
Make sure that the chain is on the correct side of the wheel
-
-
-
Tighten brake strap using screwdriver and 10mm socket wrench. Hold the nut on the inside (near the spokes) with wrench as you tighten the screw with the screwdriver.
-
-
-
With wheel pulled back, tighten the two axle nuts using the 15mm socket wrench. Tighten the non-drive side (side without the chain) first.
-
Wheel will angle as you tighten. Keep it centered with your hand as you finish tightening both axle nuts.
-
To reassemble your device, follow these instructions in reverse order.
This is Schwinn beach cruiser
Judy Summers -