Cuisinart DLC-8F Power Cable Replacement

Geschrieben von: David Colman
  • Kommentare: 1
Cuisinart DLC-8F Power Cable Replacement

Schwierigkeitsgrad

Easy

Schritte

6

Zeitaufwand

10 Minuten

Einleitung

This guide teaches the user how to replace the power cable in your Cuisinart DLC-8F. The removal of the power cable first requires the removal of the bottom hood and all of this can be done with just a Phillips #2 screwdriver. This is an easy process and should only take about 10 minutes.

  1. 4QjLHeYBXIiVm214
    4QjLHeYBXIiVm214
    SLbD4iIkxM2LYfwC

    • Remove the four 18 mm Phillips #2 screws from the bottom by prying up the rubber feet to access the screw hole.

  2. HrEAMHhAlMqEn66d
    HrEAMHhAlMqEn66d
    RGcsNC5vlTkOQINT

    • Gently lift the bottom cover from the main body.

  3. rHSZpbkXUO6PAPWX

    • Remove the two 62 mm Phillips #2 screws from the cable retaining clip.

  4. BEtxPMFwQFqsEUI4
    BEtxPMFwQFqsEUI4
    TCPfVZjXtPqXm6kG

    • Lift off the cable retaining

  5. q1RJ5Xkn2ZrMGYZO
    q1RJ5Xkn2ZrMGYZO
    RFBqhSfQJfxDsEGM

    • Pull apart the two wires of the power cable at their connections as shown.

  6. RDmB3KmlGOuWNYqv
    RDmB3KmlGOuWNYqv
    iRNXELgl6DXefIuf

    • Lift out the cable.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

David Colman

Mitglied seit: 26/01/17

573 Reputation

Ein Kommentar

So you pull apart the wires of the power cable and then what? Instructions seem incomplete.

nancimoll1 -