DJI Phantom 2 Vision Plus GPS Signal Improvement Technique

Geschrieben von: Sam Goldheart
  • Kommentare: 2
DJI Phantom 2 Vision Plus GPS Signal Improvement Technique

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

Keine Schätzung

Einleitung

Follow this video guide to decrease interference from the Wifi module and increase GPS signal strength.

The guide instructions are written, and the only audio is music, and will not be suitable for the visually impaired. You can follow our case top shell guide to remove the cover, and watch the video to learn how to move the GPS cable and add shielding.

  1. DX242yuC4MNSK1Uh
    DX242yuC4MNSK1Uh
    AyVBilA33uYkSYwD

    • Remove the following screws from the underside of the Phantom:

    • Twelve 2.0 mm hex bolts

    • Four Phillips #00 screws

  2. O4VwFMV3nTkMAKkW
    O4VwFMV3nTkMAKkW
    Qoo6HGGJGvsXHwWD

    • Gently lift up the top shell case.

    • Do not attempt to fully remove the top shell. The GPS cable is still attached to the mainboard, avoid lifting the case too high or you may damage this connection.

  3. yQ6vVerdmTqCCISE
    yQ6vVerdmTqCCISE
    LMyRmDXefk2WvtcA
    RQIx6EjshflIgJEU

    • The GPS cable molex connector is located on the backside of the mainboard, near the battery opening.

    • Pull the GPS connector straight up out of its socket.

    • Lift the top shell case up and remove it from the body of the Phantom.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Sam Goldheart

Mitglied seit: 19/10/12

457712 Reputation

2 Kommentare

hello do you still help with phantom drones

George Aguirre -

do you still help with drones/

George Aguirre -