DJI Phantom Propeller Replacement

Geschrieben von: David Hoyt
  • Kommentare: 0
DJI Phantom Propeller Replacement

Schwierigkeitsgrad

Easy

Schritte

7

Zeitaufwand

5 Minuten

Einleitung

Use this guide to replace a broken propellor on your DJI Phantom. When replacing, be sure to match the original propellor spin direction.

  1. ll3FWgDlGKdNdstG
    ll3FWgDlGKdNdstG
    quJaRquuZrlUratk
    qtghuD1wjVuoiXyl

    • Press down on battery door release tab to flip the battery door open.

  2. rrkOBYWTq4EfPeqv
    rrkOBYWTq4EfPeqv
    DHH6LfNXSFQsNfVl
    nrQImKEdKgsEVI1d

    • Pull out the battery pack.

    • Avoid pulling on the battery wires, excess stress may break the wires, damage the power connectors, or crack the internal solder joints.

  3. 2f1uJNpZFYAGwB5A
    2f1uJNpZFYAGwB5A
    6d66ATycYDRirZIP

    • Pull the two halves of the XT60 power connector apart.

    • It's a tight fit, so be careful not to hit your drone or yank on the cables when it releases!

  4. TXHgDoqxOSoEGZ6l
    TXHgDoqxOSoEGZ6l
    AhZFoURHDEQK5lMx

    • Silver-topped propeller collets unscrew counter-clockwise

    • Black-topped propeller collets unscrew clockwise

  5. KV5oRgoNOPEUj1Ct
    KV5oRgoNOPEUj1Ct
    rtcwAxSTmN3VpNvU
    HrdrZKvIA35aNqwI

    • For propellors with silver collets: Use a 12 mm wrench or socket to loosen silver collets in the counter-clockwise direction.

    • Once free, unscrew and remove the collet.

  6. Rc4iYUfVNUD5YYyK
    Rc4iYUfVNUD5YYyK
    VddyTDQbdtUKDtOO
    vm1Ge1TOTbVCPOgx

    • For propellors with black collets: Use a 12 mm wrench or socket to loosen black collets in the clockwise direction.

    • Once free, unscrew and remove the collet.

  7. EhjXoW4CluLWJFoF
    EhjXoW4CluLWJFoF
    kk61lOiAlPUXfiZt
    PksLgobUYkCE1CvP

    • Gently press down the motor shaft and lift the propeller up to remove it.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

David Hoyt

Mitglied seit: 09/04/10

3936 Reputation

0 Kommentare