DJI Spark Lid Replacement

Geschrieben von: Uzochi Anyanwu
  • Kommentare: 3
DJI Spark Lid Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

2 Minuten

Einleitung

Follow this guide to remove the lid on your DJI Spark. The lid needs to be removed to get access to the internals. The propellers and battery need to be taken out first before proceeding with detaching the lid. It is an easy 5-step process that can be done in less than 30 seconds.

  1. QYCvGqDAquBd3NRy

    • Push down on the propeller that is being replaced.

    Just a warning, I just tried this guide and it is missing tons of steps, so be careful when you try yourself.

    MisterGuy’s Channel -

  2. BanolPXfJibnAqL6
    BanolPXfJibnAqL6
    ZHHIWOjrHQIA4vWC

    • Twist the propeller until it feels loose.

    • Pull on it until it comes off.

  3. AIqrSBOgrHHKTrfB
    AIqrSBOgrHHKTrfB
    QcfytPg3uqkEvKWZ
    oj5OOFFEuvlXQ1ri

    • Flip the drone over.

    • Grip the left and right sides of the battery.

    • Slide firmly forward until it pops out.

  4. gWYX4WulWZvpaAvE
    gWYX4WulWZvpaAvE
    uplUruLlaTyEwWrK
    EFkVAfVdChxcEpue

    • Flip the drone over.

    • Remove the four 1.5mm Hex screws.

    • Remove the two 1.5mm Hex screws near the camera head.

    • You may need to remove plastic nubs from the hex screws using a spudger first.

    The middle two screws appear to have their hex holes plugged with clear plastic.

    Basil Yokarinis -

    How do you remove it?

    Daniel Montes -

  5. Gos4joW5ECPwWYDP
    Gos4joW5ECPwWYDP
    MxINtYCYxIKVCvRc
    KIa6NCZ6BbpJo6Z6

    • Hold the drone so the lid is facing up.

    • Insert the plastic opening tool into the side of the drone.

    • Slide the tool around the perimeter until you can lift the top off.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Uzochi Anyanwu

Mitglied seit: 21/10/19

391 Reputation

0 Kommentare