DOSS SoundBox Speaker Replacement

Geschrieben von: Brendan Harkreader
  • Kommentare: 0
DOSS SoundBox Speaker Replacement

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

25 Minuten

Einleitung

  1. adAiJPW3AgBn5jfP
    adAiJPW3AgBn5jfP
    2O4oRsE3iY2IHxx4

    • Use the JIS #00 screwdriver to remove the 3/32" screws that secure the speaker to the body.

    • Remove the smaller 3/32" screws that secure the left side of the speaker with a JIS #1 screwdriver.

    • The smaller screws are still the same length, but they have smaller screw heads. You can use the same screwdriver for both.

    • Using a Magnetic Mat throughout this process will help prevent losing screws.

  2. 3kK3PlTZYKEYmpBU
    3kK3PlTZYKEYmpBU
    ZJEkGluILms3HG2J

    • Use the Plastic Opening Tool to gently lift the speaker enough to see the connected wires.

  3. AffTLTDwfoPgmumA
    AffTLTDwfoPgmumA
    WyQnTvV3tiqcjZR6

    • Use a soldering iron to de-solder the two speaker wires from the speaker itself.

    • The speakers are ready to be removed and replaced.

    • Ensure that the device is turned off when handling bare wire.

    • Soldering iron is very hot.

Abschluss

To reassemble your device, follow instructions in reverse order.

Tinte & Feder

Brendan Harkreader

Mitglied seit: 27/09/18

478 Reputation

0 Kommentare