DeWalt DC970 Drill Assembly Replacement

Geschrieben von: Jonathan Hamel
  • Kommentare: 2
DeWalt DC970 Drill Assembly Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

5 Minuten

Einleitung

If you need to replace a part within the drill, then you need to remove the outer shell of the drill. By following this guide you will know how to take apart the drill assembly to get inside of it.

  1. iFAWbJDnhLhVdAlL

    • Compress the buttons on either side of the battery and lift the drill away from battery.

  2. rtlRZBdsGVSNifqH

    • Remove battery from drill.

  3. FshZipNC1Ae5umqy
    FshZipNC1Ae5umqy
    YYjY4mpiI4TYpser

    • Remove the eight 16 mm, Torx Security #15 screws.

  4. RGX65BULtpBxULxV

    • Lay the drill on its side and gently lift the top half off it.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jonathan Hamel

Mitglied seit: 10/03/16

579 Reputation

2 Kommentare

It's actually a torx #10 and obviously, you dont really need a torque wrench, I got mine apart with my pro kit with no problems.

Christopher Porter -

where is the guide?

no mention of the speed selector or any other internal parts

fred rogers -