Einleitung

Before going into replacing anything on this drill you will want to read through this guide in order to properly disassemble the drill. Following these steps will be your first step in most replacements.

  1. CUytIWFnRph3vlUk
    • Using an H-5.0 bit driver remove the four T-10 Torx screws.

  2. fIlFKGRnLa1nKGan
    • Use 2 H-5.0 bit drivers to take out the main bolt and head.

    • There will be blue locktite on the tread.

  3. sH4XRZpuSDmcWJyZ
    • Carefully remove the two halves of the handle.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Cameron MacKinnon

Mitglied seit: 06/04/16

241 Reputation

0 Kommentare