Einleitung

In this guide, we will show you how to remove and replace the Battery.

  1. AUly4p24lkMiXbOL
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before You Begin. . After working inside your computer, follow the instructions in "After Working Inside Your Computer".

    • Close the display, and turn the computer over.

  2. PlDt2b4iUPNjw5G4
    PlDt2b4iUPNjw5G4
    BjqZGYwnPEGTAVtm
    • Remove the screws that secure the base cover to the computer base.

  3. HNVkDR1WJNcvYwNp
    • Slide and lift the base cover off the computer base.

  4. ltgSXOiBYoVVsKTj
    • Align the tabs on the NEW base cover with the slots on the computer base and slide the base cover into place.

  5. UBOlWIMyyHalVQje
    • Replace the screws that secure the base cover to the computer base.

  6. GOwObvwAm6q2FMZn
    • Turn the computer over and open the display.

  7. ECGcOvDTxqjUEZhh
  8. JgZ2mXkYtIlOvXow
    • Remove the screws that secure the battery to the computer base.

  9. AVTaBmNYBiGADfla
    • Using the battery cable, lift the battery and release it from the tabs on the computer base.

  10. ENP4KacqHAB1Cses
    • Turn the computer over and open the display as far as possible.

  11. 6aORaEpkMHyHD5Lu
    • Press and hold the power button for five seconds to ground the system board.

    • Close the display and turn the computer over.

  12. lkagMTDgRiF1OdpQ
    • Align the tabs on the NEW battery with the slots on the computer base.

  13. VeaAdbLVWakCpoKa
    • Align the screw holes on the battery with the screw holes on the computer base.

  14. WUH1mRTLNN3GNsGN
    • Replace the screws that secure the battery to the computer base.

  15. IOvRG2DcjldTP3Fn
    • Connect the battery cable to the system-board connector.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Terrence15

Mitglied seit: 18/12/17

78652 Reputation

0 Kommentare