Dell Chromebook 11 CB1C13 Screen Cover Replacement

Geschrieben von: Jerry Geffrard
  • Kommentare: 0
Dell Chromebook 11 CB1C13 Screen Cover Replacement

Schwierigkeitsgrad

Difficult

Schritte

4

Zeitaufwand

10 Minuten

Einleitung

Scratches or cracks in the screen cover are very common with portable devices. While minor damage can be ignored, anything major will require a replacement since it may harm the rest of the device, and possibly the user.

  1. XHjPipCFPUSvDRQU
    XHjPipCFPUSvDRQU
    pOTCepXSWSwn2NE5
    XRg2Fc5pHrMMnaqR

    • Make sure that device is fully powered down before attempting to open the back case.

    • Remove all seven 8 mm Philips #0 screws from the back case with a Philips #0 screwdriver.

    • Once all seven screws are removed, you can pry the case off using your fingers or a plastic opening tool.

  2. uLIZ5eXI4XFj1IXY
    uLIZ5eXI4XFj1IXY
    6glyHKrJmGZUVPGo
    F5TWE4nE1pIaFSoV

    • Locate the two hinges on the corners of the device.

    • Unscrew the 5 2mm Phillips #00 screws in the hinges.

    • Pull the hinges up and slide bottom cover out

    • Gently remove the cover since it is still connected to the device by some wires

  3. 5LOpEMXELHpsIneB
    5LOpEMXELHpsIneB
    m1aqUrGj3cpwb2cv

    • Locate the two cables that connect the top panel to the device. One black, and one white.

    • Remove these two cables by grabbing the golden ends with your fingers, and gently pulling straight up.

    • Remove pin port lifting up the hinge.

  4. IPYyTlSZOYVoT4XJ
    IPYyTlSZOYVoT4XJ
    vr5Dm3RJvFV3OXtH
    fGlaHBmyBlOurxBX

    • Locate the seam between the screen cover, and the top panel

    • Starting at one of the hinge corners, take a thin metal prying tool and gently insert it into the seam.

    • Gently push the tool down towards the top panel until you feel the screen cover disconnect.

    • Repeat this process all around the screen cover until it is completely disconnected from the top panel.

    • During this process, you might hear a rough snapping sound. This is normal, and is just the sound of the screen cover's connections to the top panel coming apart.

    • Make sure to be gentle with your prying, and to move in small increments around the screen cover during this process. This is to prevent any cracks or damage to the cover, which could be harmful.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jerry Geffrard

Mitglied seit: 25/03/15

322 Reputation

0 Kommentare