Einleitung
This is a prerequisite guide! This guide is part of another procedure and isn't meant to be used alone.
Disconnect your battery cable in one easy step with this guide.
Werkzeuge
-
-
Use a Phillips #1 screwdriver to remove the four 6.8 mm-long screws in securing the cover.
-
Use a Phillips #1 screwdriver to loosen the four captive screws.
-
-
-
Insert an opening pick between the bottom-left corner of the back cover and the chassis.
-
Pry up to release the clips securing the back cover.
-
-
-
Insert your opening pick again between the bottom-right corner of the back cover and the chassis.
-
Pry up to release the remaining clips securing the back cover.
-
-
-
Use the flat end of a spudger to push the battery connector's square tab away from the socket and disconnect it.
-
To reassemble your device, follow these instructions in reverse order.
