Dell Inspiron 1100 Display Assembly Removal

Geschrieben von: Terrence15
  • Kommentare: 0
Dell Inspiron 1100 Display Assembly Removal

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

10 - 20 Minuten

Einleitung

In this guide, we will show you how to remove the Display Assembly.

  1. Fgq2mZdc2ZdfDhwv
    Fgq2mZdc2ZdfDhwv
    BRbPyKvCT5Gs4YeO

    • Follow the instructions in "Preparing to Work Inside the Computer."

    • CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface.

    • Close the display.

    • From the back of the computer, remove the two M2.5 x 5-mm screws labeled "circle D."

  2. YBSSo2rwcqbIpejn

    • Open the display assembly approximately 180 degrees, and support the display assembly so that it does not open past this position.

  3. FYPqMPidROsQBNLS

    • Remove the two M2.5 x 5-mm screws from each hinge bracket.

  4. 6BbmBTesChaGODJZ

    • Pull straight up on the pull-tab that is attached to the display-feed flex cable to disconnect the cable from the system board.

  5. EF2iVPiAALEyuVL6

    • Lift the display assembly up and out of the computer base.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Terrence15

Mitglied seit: 18/12/17

78652 Reputation

0 Kommentare