Einleitung

This guide will assist you to replace a new touchpad to of your Dell Inspiron 13-7347. Make sure the touchpad that you are replacing is specifically for Dell Inspiron 13-7347. It's very important to find the correct model of touchpad for your Dell Inspiron 13-7347 in order to prevent any troubles. Be sure to use the tools we suggested, and be gentle when you are using the screwdriver. Its very easy to lead to stripped screws if you didn't use the screwdriver correctly or not gentle enough.

Make sure to follow the instructions step by step carefully.

  1. GpqFNtPQa5WEBIOY
    GpqFNtPQa5WEBIOY
    CCBPuJm6c46rgcq6
    nYHnv5ynThWHXnS2
    • Flip the device over, so that the back is facing up.

    • Remove the ten, 7 mm, Phillips #1 screws on the back of your Dell Inspiron 13-7347.

    • Use the suction cup to lift off the back case.

  2. BwyOVvRIGTaPQXLG
    BwyOVvRIGTaPQXLG
    PP2CFrMuRjlPuMce
    3PnCjNOlfHGGXMwg
    • Remove the three 4 mm JIS #00 screws that secure the battery to the device.

  3. FkDawYuKPvamgRZ1
    FkDawYuKPvamgRZ1
    wUR14jEuHwh4DDkR
    CUKBZsiIkWRiZYbt
    • Unplug the flat connector that is connected to the battery.

  4. Gl1jSePK2PLZQddg
    Gl1jSePK2PLZQddg
    aMlMYGoOMZp4ngCT
    AwcWGrC1qqQnmEtV
    • Lift the battery steadily from the device.

    • Tilt the battery upward while removing.

  5. YIuBggScRkXEG61O
    YIuBggScRkXEG61O
    tNcpKqy64USAwaNh
    • Unplug the sliding connector.

    • The cord is extremely fragile.

  6. VKHFGgZeMjvJP4Vh
    VKHFGgZeMjvJP4Vh
    ts2UrvioZeFTSoge
    3IWcWuqQMQLZmJlq
    • Flip the cord upward.

  7. BOcNKsYOY3ry6NEk
    BOcNKsYOY3ry6NEk
    eXjNnPNqy3Tkr56X
    • Remove the four 2.5 mm JIS #00 screws.

  8. Kw6FGLvJhbepUwdr
    Kw6FGLvJhbepUwdr
    JNmlYxGiu6SSbdnk
    lZp1FaPilxhDCxHo
    • Flip the metal plate upward.

    • Take out the metal plate completely.

  9. xdwagxTqBrbfEJGS
    xdwagxTqBrbfEJGS
    cVkT4iSWy5EQodkC
    SNW2CGNfS1qb3QhT
    • Remove the touchpad by lifting up the handle.

Abschluss

To reassemble your device, follow these instructions in reverse order.

lee120496

Mitglied seit: 06/02/19

643 Reputation

0 Kommentare