Einleitung

If you notice your laptop is overheating, then this guide may be able to help. This guide will show you how to replace the fan in a few steps.

  1. gFDYQDFgSyZfSIhQ
    • WARNING: Please read the safety information shipped with your computer and follow recommended steps before working inside your computer. When finished working inside your computer, follow the instructions included in the safety information.

    • Close the computer display and turn the computer over so that the base of the computer is facing up.

  2. ZCEhODqCAQIwwh6J
    • Remove the ten screws that secure the base cover to the base of the computer.

  3. IX3VUruclVptJja3
    • Using a plastic scribe (plastic opening tool), pry the base cover off of the base of the computer.

  4. EhnRxm3ZEMhXPWmY
    EhnRxm3ZEMhXPWmY
    IGGy4Sor6HtINCYY
    • Before opening your device, ensure that all data is backed up on a hard drive to prevent data loss.

    • Loosen and then unplug the hard drive cable.

  5. LXCPiAHKTEmFhbyF
    LXCPiAHKTEmFhbyF
    Omv2Gaik2hVHHSIJ
    • Remove the two M2 3mm screws attaching the battery using the Phillips #1 screwdriver.

    • Remove the battery.

  6. uBAMHVpPJeFwxaoI
    uBAMHVpPJeFwxaoI
    DMRu3o1YiVo1OnrC
    cCDYn5LajR2YsJhY
    • Pry open the two clips.

    • Gently lift the RAM stick and pull it out of the motherboard.

  7. mHuHFEPUWsYGoCqH
    mHuHFEPUWsYGoCqH
    Q2cJF5MXZalSstOE
    jlNFDkV4ugOyLeWm
    • Unplug the daughterboard cable in two places, then remove the daughterboard.

    • Unplug the fan cable.

  8. GRh4vDnHGK4Dp3Of
    GRh4vDnHGK4Dp3Of
    gZIBBODdSUUM5KEj
    • Remove two 3mm screws from the cooling fan using the Phillips #1 screwdriver.

    • Remove the cooling fan from the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Stephany Marin Restrepo

Mitglied seit: 19/03/18

613 Reputation

0 Kommentare