Einleitung

This guide will show you how to replace your device's battery without any hiccups. You will need one Phillips #0 screwdriver and one plastic spudger.

  1. yxttamIu3iwaTIv6
    • First flip over the laptop to expose the back panel

    • Use a Phillips #0 screwdriver to unscrew all ten 7mm Phillips head screws holding the back panel in place.

  2. COPlnvTVFy1C2Afr
    • With a plastic spudger, carefully remove the back panel by prying each corner off individually

    • Slowly pick up the panel and set it aside

  3. OUvMl2IHVMMFxDhG
    OUvMl2IHVMMFxDhG
    baRTlZYISq6Fm3QA
    3R5ExsAvQ22V31vE
    • The battery will be the largest black component in the device located near the bottom edge. Using a Phillips #0 screwdriver, unscrew the two 3mm Phillips head screws holding in the battery.

  4. 36nDoJOvpTpQYPr4
    36nDoJOvpTpQYPr4
    YGyieRtqiudAO3gw
    4Ru4KVVEsPEwvNP3
    • To remove the old battery, slightly lift the bottom edge of the battery with your hands

    • Now slowly pull the battery towards you to fully detach the battery

Abschluss

To reassemble your device, follow these instructions in reverse order.

Valentin Medina

Mitglied seit: 30/01/18

658 Reputation

Ein Kommentar

thanks for this, my daughter’s laptop now needs a new battery and while I assumed it would be easy, it’s good to get a preview.

Paul M -