Dell Inspiron 13-7373 Battery Replacement

Geschrieben von: John Egan
  • Kommentare: 6
Dell Inspiron 13-7373 Battery Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

5 - 10 Minuten

Einleitung

This guide will assist in replacing the battery on a Dell Inspiron 13-7373. This is not very difficult and requires very little removal of other parts of the laptop.

  1. iyxWP2ODiTQCkD6A
    iyxWP2ODiTQCkD6A
    wqEqCVBmwbDIGHid
    QrHpeWqJVBIU6wVW

    • Before you begin, be sure to turn off your laptop and unplug it from the outlet.

    • Remove the ten 7.5mm Phillips #00 screws from the bottom of the laptop.

    • Use an opening tool to remove the bottom half of the case from the laptop.

  2. nEdPWtIILkjdHBuV

    • Use a Phillips screwdriver to remove the four screws holding the battery in place.

  3. oQPIgKkMIbjlp452
    oQPIgKkMIbjlp452
    53UDQmaJdNqi5uVd

    • Pull the plastic tab on the battery cable to disconnect the cable from the battery.

  4. lANNax1OXLJmyjVI
    lANNax1OXLJmyjVI
    oKLAwiVSbojlOAwK

    • Remove the battery from the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Tinte & Feder

John Egan

Mitglied seit: 25/10/19

413 Reputation

6 Kommentare

can you recommend a battery model #? I want to be certain I buy the correct one.

Peter Zinsli -

The first step needs to be amended. There are 10 back cover screws including the central one, not 9. Additionally, the battery cable removes outward from the battery, not upward.

Mike Vandenberg -

Hi Mike,

Thanks for the feedback! I’ll make the corrections you suggested.

Arthur Shi -

I'm told that you should replace the connector cable that connects the battery to the motherboard whenever you replace the battery. However that cable doesn't come with the kit. How do I get that part?

Bill Knapp -

I found that I had to remove the back of the laptop from the touchpad side of laptop first, not the hinge side first as indicated in the pictures.

Rich Hunt -

can you elaborate on that? I can't find any more thorough instruction on removing the backside after the screws have been removed.

Boheme Nellis -