Einleitung

In this guide, we will show you how to remove and replace the Memory Modules.

  1. MAJFFA6CniOV1mDg
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in "Before You Begin".

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Remove the screw that secures the memory-module cover to the computer base.

  2. CysFxeQNW1oS6iKV
    • Lift and slide the memory-module cover off the computer base.

    • CAUTION: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.

  3. ItFQBoF25O15qjO2
    • Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the memory module pops up.

  4. AH2FcGXXMUjbk5XI
    • Remove the memory module from the memory-module connector.

  5. djhfri1nmiZmBXvw
    • Align the notch in the NEW memory module with the tab in the memory module connector.

  6. jl3rQNoHcF4DlQYU
    • Slide the memory module firmly into the slot at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.

    • NOTE: If the memory module is not installed properly, the computer may not boot.

  7. wFyfYpf1YDqKdxsm
    • CAUTION: If the memory module cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.

    • Align the tabs on the memory module cover with the slots on the computer base and place the module cover in position.

  8. B2ehiCZgRhEDeqIl
    • Replace the screw that secures the memory module cover to the computer base.

Terrence15

Mitglied seit: 18/12/17

78652 Reputation

0 Kommentare