Einleitung
This guide will teach you to remove the back case.
This should be done before most repairs of the 5502.
-
-
Save and close all open files and exit all open applications.
-
Shut down your computer. Click Start > Shut down.
-
Disconnect your computer and all attached devices from their electrical outlets.
-
Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your computer.
-
-
-
In the back there are 9 screws.
-
(captive) M2x7.5
-
M2x4
-
Unscrew these and store in a safe place. (eg: nescafe cup, container )
-
-
-
Using a plastic scribe, pry the base cover starting from the recess at the display hinge and work your way around the sides to remove the base cover.
-
-
-
The sticker and the cable connector(below the sticker)
-
Peel the tape and disconnect the battery cable from the system board.
-
-
-
Press and hold the power button for five seconds to ground the computer and drain the flea power.
-
To reassemble your device, follow these instructions in reverse order.
If you were following another article and was said to follow this guide, now you can go and follow it/continue in the step you stopped!
