Einleitung

Before removing the back panel, make sure the device is disconnected from any power source. Make sure that your battery has also been removed.

  1. CIp3eNL4BnoqPSmH
    CIp3eNL4BnoqPSmH
    HI2N5aJMFO2XN1Df
    • Use a Phillips #1 screwdriver to remove the two 2.5x8mm screws on the back panel.

  2. sXsKCbPDZUZJHRZC
    sXsKCbPDZUZJHRZC
    shkLIbIop5aBxENN
    • Place the plastic spudger in the slot. Using the flat side of the spudger pry the back panel upward and off.

    • Do not be afraid to use a bit of muscle, as the panel does not come off without some force.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kyla Ward

Mitglied seit: 19/03/18

559 Reputation

0 Kommentare