Einleitung

How to remove and replace the hard-drive

    • Lift the latch and disconnect the hard-drive cable from the system board.

    • Remove the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.

    • Lift the hard-drive assembly from the palm rest and keyboard assembly.

    • Remove the screws that secure the hard-drive bracket to the hard drive.

    • Lift the hard drive from the hard-drive bracket.

    • Disconnect the interposer from the hard drive.

    • Connect the interposer to the hard drive.

    • Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.

    • Replace the screws that secure the hard-drive bracket to the hard drive.

    • Place the hard-drive assembly on the palm rest and keyboard assembly and align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly

    • Replace the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.

    • Slide the hard-drive cable into the connector on the system board and close the latch to secure the cable.

Abschluss

To reassemble your device, follow these instructions in reverse order.

darrius

Mitglied seit: 26/03/18

5213 Reputation

0 Kommentare