Einleitung

Is your device experiencing problems with holding a charge or turning on? Consider using this guide to replace the battery in your device.

  1. rBoWkmLjKIEWoKbK
    rBoWkmLjKIEWoKbK
    JKwXJnTyf5NiZJxG
    • Ensure the device is powered off and unplugged. Close the device and orient it face up, with the hinges further away from you.

    • Flip the device over so the backside is facing you.

  2. hNnxvqZkr5B1MKl6
    • Using the Phillips #1 screwdriver, remove all nine 7mm screws.

  3. NJsHhBGIXyxNB6hQ
    NJsHhBGIXyxNB6hQ
    uKpdoJJTLPaQefGl
    • Using the plastic opening tool, pull the back panel upward. Move the opening tool along the edge of the device and lift the panel off of your device.

    • Be aware, the back panel is kept in place by magnetic clips. They will offer some resistance, but continue to gently leverage upwards.

  4. uakTaQ1bdR1BeKdU
    • Remove the three 4mm screws holding battery in place using the Phillips #0 screwdriver.

  5. p2BdLkFcLswLO2Ur
    • Using the iFixit opening tools, lift the battery out of its housing.

  6. REWkJTDAkyNVJbaY
    • Once loosened, use your fingers to lift the battery up and out of its housing.

    • There is a small cable which sits in a rut in the top of the battery. Ensure that it is pushed out of the way before removing completely.

  7. 5hVaCgB2nnfIHTD6
    • Remove the battery completely.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Christopher Gravelle

Mitglied seit: 23/10/18

837 Reputation

Ein Kommentar

Apparently the battery screws on mine all have red thread lock on them, meaning they will not come out and I fear I may end up stripping them if I’m not careful, I got one out, which his how I know they used red thread lock. Blue would have been sufficient

Joshua Vignolo -