Einleitung

By following the steps in this guide one should be able to replace the complete display assembly on the a Dell Inspiron 7568.

  1. r2LOHF3bklQx5wc1
    r2LOHF3bklQx5wc1
    NZN2shdoLTnmYmEc
    • Remove the ten 7mm Phillips #1 screws on the bottom cover.

    • Remove the bottom cover.

  2. xvH2JJdQyOdVoFSK
    xvH2JJdQyOdVoFSK
    3oJWZuEXtCtLlfBP
    • Remove the four 3mm Phillips #1 screws holding the battery.

    • Unhinge the connector cable to the battery.

    • Remove the battery.

  3. mTXfsrbqqWCMn4sL
    mTXfsrbqqWCMn4sL
    CAMSSBORLaRyOPmf
    • Unscrew & remove the two 3mm screws (using a ph1 screwdriver bit) and the cable bracket, above the motherboard

    • Doing this will allow one to access the LCD-motherboard connector cables.

  4. HgmFa2txgb4wCOrf
    HgmFa2txgb4wCOrf
    FGGk2iMPrDV1gUCy
    • Unscrew the 7mm screws that secure the left and right hinges (using a ph1 screwdriver bit).

  5. InmugH6NuYtvfRRS
    InmugH6NuYtvfRRS
    QC3xuJZxSbuoJACZ
    FnMJrUefQMWTV2Oy
    • Disconnect the antenna cable (under the left hinge)

    • Disconnect the LCD and Touchscreen display cables under the right hinge.

    • These are a set of two cables. For better image see image two in step one of this guide.

  6. od6Kj6prNu1EQ6vC
    • Carefully separate the screen from the bottom half of the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Yash Samant

Mitglied seit: 22/02/17

373 Reputation

0 Kommentare