Einleitung

This guide will walk you through how remove the battery from the systems board of a Dell Inspiron 7573 2-in-1. This guide is useful for replacing a battery that may be defective or damaged such as if the battery may not be holding a full charge. If your battery isn’t holding charge like it used to, use this guide to replace it!

  1. VWWaI1me6RIE4jHl
    VWWaI1me6RIE4jHl
    LceKAZAwUFE5WfRJ
    • Make sure computer is off before you begin.

    • Remove the four 5 mm screws from the bottom edge of the laptop using a Phillips #00 screwdriver.

    • Loosen the remaining six captive screws from the bottom cover with a Phillips #00 screwdriver.

  2. RUfBKPttjIllBDvV
    RUfBKPttjIllBDvV
    ZXhZjKIKD3LuLRlL
    DdSJRVoCCvX31rOH
    • Using a spudger, pry off the bottom cover by gently prying from corner to corner in order to disengage the plastic clips.

    • Lift off the bottom cover.

    • After the base cover is removed, your laptop should look similar as depicted in the images provided.

  3. rFjCp5KAXFyjGHn5
    • Remove the four 3 mm screws holding the battery in place with a Phillips #00 screwdriver.

  4. fuwHdBSxSY2ZxXEg
    fuwHdBSxSY2ZxXEg
    RYtrlAEIOHYS2nRa
    3PbUtOdX5XXRA1y2
    • Using the pull tab, disconnect the battery cable from the system board.

    • Lift the battery out from the laptop case.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kylie Freese

Mitglied seit: 27/09/21

373 Reputation

0 Kommentare