Einleitung
Werkzeuge
-
-
Before any work can be done ensure that the laptop is powered off.
-
Use either the power button on the computer or issue a shutdown from the operating system.
-
Once the device is off place the laptop on a flat surface and flip it so that the bottom is facing upwards.
-
-
-
Locate the battery release switch on the bottom of the laptop.
-
Once located slide the switch into the unlock position.
-
-
-
Locate the “lip” on the laptop to lift the battery outside of the compartment.
-
Once the battery is out, you will be able to find the replacement part number in order to purchase a new battery.
-
-
-
Once the new battery has been acquired take the battery and place it in the empty battery slot.
-
Slide the switch into the lock position to secure the new battery.
-
-
-
Remove the back panel: Use the screwdriver to remove the screws on the back panel.
-
Lift the back panel off the laptop to expose the interior of the laptop.
-
Locate the hard drive.
-
-
-
Remove the current optical drive.
-
Look at the model number and order the replacement if needed.
-
Insert the new optical drive in.
-
To reassemble your device, follow these instructions in reverse order.
2 Kommentare
@oldturkey03 This guide is showing how to remove the ODD, not the HDD. I was wondering if I should change it. The guide is also incorrect. Only one screw is necessary to remove the ODD. I suppose I should make another and archive this...
@pccheese it's a student guide so leave it alone. Do not archive anything on this. Go ahead and create your guide and then post that as an alternative. I would give the composer of this guide the courtesy and kindly let them know.